Selecting The Correct Cuff Size; Applying The Arm Cuff - A&D UA-767S Instruction Manual

Selecting the Correct Cuff Size

Using the correct cuff size is important for an accurate reading. If the cuff is
not the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index
correct cuff. (Refer to "Symbols that are printed on the cuff" on the next page)
If the index
purchase a replacement cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size
31 cm to 45 cm
22 cm to 42 cm
22 cm to 32 cm
Arm size: The circumference at the biceps.
Note: Model UA-767S is not designed for using a small cuff.

Applying the Arm Cuff

1. Wrap the cuff around the upper arm,
about 1-2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the
skin, as clothing may cause a faint
pulse, and result in a measurement
error.
2. Constriction of the upper arm,
caused by tightly rolling up a
shirtsleeve, may prevent accurate
readings.
3. Confirm that the index
within the proper fit range.
Using the Monitor
and proper fit range, on the cuff, tell you if you are applying the
points outside of the range, contact your local dealer to
Recommended Cuff Size
Wide Range Cuff
Large Adult Cuff
Adult Cuff
Do not roll up shirtsleeve tightly.
points
Index
English 9
Catalog Number
CUF-F-LA
CUF-I
CUF-F-A
Cuff
1-2 cm
Air Hose
Artery position mark
Secure the fabric
fastener firmly.
and proper fit range