Bissell 24A4 SERIES User Manual page 9

O
perations
Upright cleaning mode continued
Cleaning continued
3. Release the trigger and make one slow
forward and backward pass over the
same area. Repeated passes will help
aid in dry time.
4. continue passes until cleaning area
is complete.
NOTE: Your machine may be
equipped with a circuit breaker that
will automatically shut off the brush
if a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object and then
plug the machine back in to reset the
circuit breaker.
Empty dirty tank
1. When the dirty tank reaches the "FULL"
line on the tank, it is time to empty.
2. Remove the dirty tank and carry it to
a utility sink, toilet or outside (where
you will dispose of the dirty water).
3. to unlock the dirty tank lid, rotate the
handle over the back of the tank. Remove
lid and pour out dirty water. Rinse out the
dirty tank to remove any debris.
4. Replace the top of the tank and rotate
the handle forward to lock in place on
front of tank.
5. before replacing the tank on the
machine, wipe debris from red filter
Cleaning your machine
1. flush out machine of any remaining
residual solution.
1a. fill the formula & water tank with
hot tap water and turn on your
machine.
1b. Recline handle and press the spray
trigger for about 15 seconds while
making forward and backward
passes on carpet. continue without
pressing the trigger until there is no
more water being suctioned up.
1c. turn off the machine and wrap the
powercord. make sure the dirty tank
and the formula & water tank are
emptied, rinsed, and dried before
the next use.
1d. before you replace tank, clean
all debris from red filter screen.
w w w . b i s s e l l . c o m
CAUTION:
do not overwet. take care not
to run over loose objects or
edges of area rugs. stalling
brush may result in premature
belt failure.
Tip:
make only one trip to the sink by
removing the entire portable cleaner.
fill and empty in the same trip.
3.
2.
4. 5.
WARNING:
to reduce the risk of fire, electric
shock, or injury, turn power
off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Tip:
for best results, empty,
rinse, and dry both tanks
before storing.
8 0 0 . 2 3 7 . 7 6 9 1
9