Summary of Contents for Bissell Cleanview 2492 Series
Page 1
CLEANVIEW ® Vacuum ___________ USER GUIDE 2492 Series More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.ca...
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. www.BISSELL.ca...
Thanks for buying a BISSELL® vacuum! We love to clean and we’re excited to share one of our innovative products with you. This guide has important instructions on how your new vacuum works, including using, maintaining, and if there is a problem, troubleshooting.
Do not plug in your vacuum until you are familiar with all instructions and operating procedures. Handle Stretch Hose Tank Release Button Carry Handle Pre-Motor Filter (not shown) Dusting Brush Holder Dirt Tank Post-Motor Filter Recline Height Pedal Adjustment Power Pedal NOTE: The Crevice Tool is stored inside the Extension Wand. www.BISSELL.ca...
Wrap hose up and around the hose wrap on the Dusting Extension Wand handle. Slide end of hose Brush (Crevice Tool stores inside) into vacuum base. NOTE: The PowerFoot will not suction properly unless the hose is firmly attached. www.BISSELL.ca...
NOTE: Certain carpets and low humidity conditions may generate small static discharges. Static discharges are entirely harmless and are not associated in any way with the main power supply. www.BISSELL.ca...
To replace, fit into place you hear “click”. and twist to the right. NOTE: The Dirt Tank may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. www.BISSELL.ca...
Page 8
“click”. NOTE: Replace this filter every 3 to 6 months. For replacements, go to www.BISSELL.ca. Maintain the Post-Motor Filter Located on the front of the vacuum above the Recline...
Page 9
Remove If necessary, remove the the bottom of your vacuum. any debris that may screw from the foot hose Remove the bottom cover and have gotten clogged. and check for clogs. the brush. Remove any debris. www.BISSELL.ca...
Adjust foot to correct height setting, see difficult to adjustment page 6 push Visible dirt Dirt Tank full Empty Dirt Tank escaping Filters missing or installed Check pre-motor and post-motor from incorrectly filters for correct installation, see page 8 vacuum www.BISSELL.ca...
This warranty does not apply to this warranty or have questions regarding fans or routine maintenance components what it may cover, please contact BISSELL® such as filters, belts or brushes. Damage or Consumer Care by E-mail or telephone as malfunction caused by negligence, abuse, described below.
We’ll contact you with any important product maintenance reminders and alerts. Visit BISSELL.ca/registration! Parts & Supplies For Parts and Supplies, go to www.BISSELL.ca and enter your model number in the search fi eld. We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation®...