To Use A User Ssid To Establish A Wireless Lan Connection And Project - Casio XJ-A147 Manual

To use a user SSID to establish a wireless LAN connection and
project
Projector Operation
1.
Connect the wireless adapter to the projector (page 10) and then turn on the
projector.
The input source will automatically switch to either "Wireless" (XJ-A Series) or "Network"
(XJ-M Series), and projection of the LAN connection standby screen will start.
If projection of the LAN connection standby screen does not start, press the [INPUT] key. On
the "Input" dialog box that appears, use the [ ] and [ ] keys to select either "Wireless" (XJ-A
Series) or "Network" (XJ-M Series) and then press the [ENTER] key.
2.
Select the user SSID you created with the procedure under "To create a user
SSID" (page 19).
In this case:
Projector SSID was not changed after you performed
the operation under "To create a user SSID" (page
19).
Projector SSID was changed to a different one after
you perform the operation under "To create a user
SSID" (page 19).
3.
Press the [ESC] key twice to return to "Network Settings".
4.
Use the [ ] key to select "Update Network Settings" and then press the [ENTER]
key.
This will display a confirmation dialog box asking if you want to update network settings.
5.
Press the [ ] key to select "Yes", and then press the [ENTER] key.
This applies the SSID change to the projector and closes the dialog box. Wait until the LAN
connection standby screen starts to be projected again.
Perform this operation:
Advance directly to step 6.
Press the [MENU] key and then select the following:
"Network Settings" 3 "Projector Wireless LAN
Settings" 3 "SSID". On the dialog box that appears,
select the user SSID.
22