Wired Lan Connection Procedures; To Use A Lan Cable To Connect A Computer Directly To The Projector - Casio XJ-A147 Manual

Wired LAN Connection Procedures

To use a LAN cable to connect a computer directly to the
projector
1.
Connect the computer to the projector with the LAN cable.
Projector Operation
2.
Press the [INPUT] key. This will display the "Input" dialog box.
3.
Use the [ ] and [ ] keys to select "Network" and then press the [ENTER] key.
4.
Check the IP address ("Server IP") in the lower right corner of the LAN
connection standby screen.
Here, we will use a projector IP address of 192.168.100.10 (projector initial default setting).
Computer Operation
5.
Change the IP address of the computer to 192.168.100.XXX (XXX is a value from
1 to 9 or 11 to 254).
The steps up to this point are to establish a LAN connection between the projector and
computer. The steps from here are for projecting the computer screen.
6.
Start up Network Connection.
The Network Connection window will appear with the message "Connecting".
If your computer is running Windows 7, 8 or 8.1 and the "Set Network Location" dialog box
appears, click [Cancel] to close the dialog box.
A "Projector List" dialog box will appear as soon as Network Connection finds a projector to
connect to.
7.
Click the IP address of the projector you want to connect with, and then click
[OK].
For the projector's IP address, check "Server IP" in the lower left corner of the projection
screen (LAN connection standby screen).
36