Supported Operations after Logging In to the Projector Admin
Pages
To display the system status
1.
Referring to "Logging In to the Projector Admin Pages over a Wireless LAN
Connection" (page 53), log in to the Projector Admin pages.
This will display the "System Status" page. The table below explains the information that
appears on the page.
Item Name
Firmware Version
IP Address
Subnet Mask
Default Gateway
Wireless MAC Address
Wire MAC Address
(XJ-M Series only)
Projection Status
Number of Users
2.
To log out from the Projector Admin pages, click "Logout".
This is the version of the projector's firmware (built-in software).
IP address currently assigned to the projector.
Subnet mask value currently configured on the projector.
Default gateway currently configured for the projector.
Fixed wireless LAN MAC address assigned to each wireless adapter.
Fixed wired LAN MAC address assigned to each projector.
Projection Standby: Standing by for projection over a LAN connection.
Projecting: Projecting over a LAN connection.
Number of users currently projecting from computers via a LAN connection.
58
Description