To Display Wireless Lan Information - Casio XJ-A147 Manual

To display wireless LAN information

1.
Press the [MENU] key to display the setup menu.
2.
Use the [ ] key to select "Network Settings" and then press the [ENTER] key.
3.
Use the [ ] key to select "Wireless LAN Info" and then press the [ENTER] key.
This displays the "Wireless LAN Info" dialog box. The table below explains the information that
appears on the dialog box.
Item Name
SSID
Wireless MAC Address
IP Address
DHCP
Security Settings
External AP SSID
External AP Connection
Status
4.
To close the dialog box and exit the setup menu, press the [MENU] key.
Shows the projector's current SSID (which is used for wireless LAN connection
with an external device).
Fixed wireless LAN MAC address assigned to each wireless adapter.
IP address currently assigned to the projector.
Shows the current projector DHCP sever status ("Auto" or "Disable").
Shows the encryption system being used by the projector's current SSID. For
information about the encryption system, see step 7 under "To create a user
SSID" (page 19).
Appears when "Enable" is specified for "External Access Point" on the "Network
Settings" page (page 30). When the projector is connected to an external
wireless LAN access point, shows that access point's SSID. When not
connected, shows "No connection".
Appears when "Enable" is specified for "External Access Point" on the "Network
Settings" page (page 30). When the projector is connected to an external
wireless LAN access point, shows "Connected". When not connected, shows
"Disconnected".
48
Description