Replacing The Front I/O-Panel; Procedure; Post-Requisites - Dell Inspiron 3646 Owner's Manual

Replacing the Front I/O-Panel

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Insert the front I/O panel clamps into the slots on the front panel.
2 Slide the front I/O panel towards the top. Ensure that the screw hole on
the front I/O panel aligns with the screw hole on the front panel.
3 Replace the screw that secures the front I/O panel to the front panel.
4 Route the front I/O panel cables through the routing guides on the
chassis.
5 Connect the front I/O panel cables to the system-board connectors
(USBF1, USBF2, and AUDIOF1).
For more information on the location of the cable connectors, see
"System-Board

Post-requisites

1 Follow the procedure from step 3 to step 6 in "Replacing the
2 Replace the
3 Replace the
Components".
front bezel.
computer cover.
Computer. After working inside your
After Working Inside Your
drive cage".
41