Procedure
CAUTION: Incorrect alignment of the fan and heat-sink assembly can
damage the system board and processor.
1
Place the fan on the heat-sink assembly as shown in the figure.
2
Align the screw holes on the fan with the slots on the heat-sink assembly.
1
screws (4)
3
fan cable
5
optical-drive power cable
3
Replace the screws that secure the fan to the heat-sink assembly on the
system board.
4
Connect the power and data cables to the connectors on the optical
drive.
5
Connect the fan cable to the system board connector (FANC1).
For more information on the location of the fan connector, see
Board
Components".
2
fan
4
optical-drive data cable
"System-
21