Prerequisites
1
Remove the
2
Follow the procedure from step 1 to step 5 in "Removing the
Procedure
1
Locate the password jumper (PSWD1) on the system board.
For more information on the location of password jumper, see
Board
Components".
2
Remove the password jumper plug.
1
jumper plug
3
password jumper (PSWD1)
3
Follow the procedure from step 3 to step 6 in "Replacing the
4
Replace the
computer
5
Turn on your computer and wait till the operating system is completely
loaded.
6
Move your mouse pointer to the upper-right or lower-right corner of the
screen to open the charms sidebar, and then click or tap Settings →
Power → Shut down.
7
Remove the
8
Follow the procedure from step 1 to step 5 in "Removing the
9
Replace the password jumper plug on the password jumper.
Post-requisites
1
Follow the procedure from step 3 to step 6 in "Replacing the
2
Replace the
computer
52
computer
cover.
cover.
computer
cover.
cover.
2
CMOS jumper (CMCL R2)
drive
cage".
"System-
drive
cage".
drive
cage".
drive
cage".