Foxconn 6497MB Series User Manual page 46

RING Power Up Control (Default: Enabled)
If this option is enabled, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an in-
stalled fax/modem. This function needs to be supported by the relevant hard-
ware and software. The setting values are: Disabled and Enabled.
MACPME Power Up Control (Default: Enabled) (optional)
This option is used to enable or disable the system to be waken up by SIS
onboard LAN.
PCIPME Power Up Control (Default: Enabled)
This option is used to enable or disable the system to be waken up by PCI
card.
PS2KB Power Up Control (Default: Hot Key)
This option is used to set which action will wake up PS/2 keyboard from S3/
S4/S5 status. The hotkey is Ctrl+Alt+Backspace. The setting values are Any
Key, Hot Key and Password.
PS2MS Power Up Control (Default: Click)
This option used to set which action will wake up PS/2 mouse from S3/S4/S5
status. The setting values are: Disabled, Click, Move & Click.
Power UP by Alarm (Default: Disabled)
This option is used to set the timing of the start-up function. In order to use
this function, the start-up password function must be cancelled. Also, the PC
power source must not be turned off.
Month Alarm
This option is used to set the timing for the start-up month. The setting values
contain 1 - 12 and NA.
Chapter 3
PM Wake Up Events Menu
BIOS Description
39