Foxconn 6497MB Series User Manual page 37

Hyper-Threading Technology (Default: Enabled)
This option is used to turn on or off the Hyper-Threading function of the CPU.
The available setting values are: Disabled and Enabled.
Note: This function will not be displayed until a CPU that supports Hyper-
Threading has been installed.
First/Second/Third Boot Device (Default: Floppy/Hard Disk/CDROM)
This option allows you to set the boot device sequence. The available setting
values are: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,
USB-CDROM, LAN and Disabled.
Boot Other Device (Default: Enabled)
With this function set to Enabled, the system will boot from some other
devices if the first/second/third boot devices failed. The available setting val-
ues are: Disabled and Enabled.
Security Option (Default: Setup)
When it is set to "Setup", a password is required to enter the CMOS Setup
screen; When it is set to "System", a password is required not only to enter
CMOS Setup, but also to start up your PC.
Thermal Management (Default: Thermal Monitor 1)
This option is used to manage CPU thermal.
Limit CPUID MaxVal (Default: Disabled)
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled.
30
Chapter 3
CPU Feature Menu
BIOS Description