Foxconn 6497MB Series User Manual page 25

1394 Connector: F_1394 (optional)
The 1394 expansion cable can be connected to either
the front (provided that the front panel of your chassis
is equipped with the appropriate interface) or rear
panel of the chassis.
IrDA Connector: IR
This connector supports wireless transmitting and re-
ceiving device. Before using this function, configure the
settings of IR Mode from the "Integrated Peripherals"
section of the CMOS Setup.
Chassis Intruder Connector: INTRUDER
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. To utilize
this function, set "Case Open Warning" to "Enabled" in the "PC Health Status"
section of the CMOS Setup. Save and exit to make sure this function takes effect.
18
Chapter 2 Installation Instructions
TPA +
GND
TPB +
+12V
Empty
1 INTRUDERJ
1 2
TPA -
GND
TPB -
+12V
9 10
F_1394
Empty
GND
1
IRRX
IRTX
+5V
IR
2 GND
INTR