Lennox CLIMATIC 40 User Manual page 8

DESCRIPTION OF CONTROLS
a) Enter time bands menu.
3 sec.
d) Set 1 ST time band of weekday start minutes.
Flashing
g) Accept.
NOTE: You must set the DC40 clock before programming time bands.
Time bands programs keep current operating mode (if it was in cool mode, it keeps working in cool mode; if it was in automatic
mode, it keeps working in automatic mode, etc.).
CLIMATIC 40 User manual • MUL37E-0607 / 10-2008
CONFIGURATION
b) Set 1 time band for weekday start hour.
ST
Time band 1
e) Accept.
h) Repeat steps b-c-d-e-f-g to programme 2
band for weekdays.
Time band 2
ACTIVATION
DEACTIVATION
Weekdays
fl ashing
nd time
Flashing
EXAMPLE IN SUMMER
Hour
8:00
(Time band 1)
18:00
(Time band 2)
c) Accept.
f) Set 1 ST time band of weekday set point (on/
off/temperature).
Flashing
i) Repeat steps b-c-d-e-f-g-h to programme the two
time bands for weekends.
Weekend
Flashing
Weekdays
22°C
23°C / 25°C
Weekend
OFF
OFF
• 7 •