Moving And Transporting Your Easytravel Elite - Tzora EasyTravel Elite ET1E User Manual

6. MOVING AND TRANSPORTING YOUR EasyTravel Elite

6.1. Moving Your EasyTravel Elite in Freewheel Mode when unfolded:
The Freewheel switch (Fig. 1/17) is used for releasing the brake and mov-
ing the EasyTravel Elite without operating the motor. Before activating,
make sure your EasyTravel Elite is switched on. Turn Freewheel switch to
the "freewheel" position and push or pull the EasyTravel Elite manually.
NOTE: The Freewheel mode can only be activated after the battery is in
place and the power switch (Fig.9/1) is turned on. Doing otherwise will
cause a fault situation indicated by rapid flashing of the Indicator light
(Fig. 9/4). See section 4.2.
WARNING: The Freewheel switch should
never be engaged on a slope.
CAUTION: The seat back must remain in
the upright position.
6.2. "Walking" your EasyTravel Elite
in the folded position
The folded EasyTravel Elite may be
pulled along suitcase style. The battery
should be carried separately (Fig. 11) or
in the utility basket. See folding instruc-
tions on page 8.
6.3. Transporting
Elite Quickly And Easily
Your EasyTravel Elite can be disassem-
bled and transported in most car trunks.
When disassembling for transportation or
storage:
1. Disconnect battery pack and place in
Utility basket (Fig. 12/1)
2. Disconnect front column (Fig. 12/2) and
fold rear frame separately (Fig. 12/3)
3. For storage – set down front column
in a stable position.
4. For transportation, place EasyTravel
Elite components in car trunk as
shown in figure 13
EasyTravel Elite – ET1E User's Manual
Your EasyTravel
.
Rev. 0708 15