Weider WESY87100 User Manual page 18

ATTACHING AND REMOVING THE SEAT
Set the bracket on the Seat Frame (36) onto the indi-
40 36
cated pins on the Front Upright (42). Attach the Seat
13
Frame to the Front Upright with the 5/16" x 2 3/4"
Carriage Bolt (14) and the Seat Knob (40).
42
For some exercises, the Seat (13) must be removed.
First, be sure that the chain is not attached to the leg
14
lever. Next, remove the Seat Knob (40) and the 5/16"
x 2 3/4" Carriage Bolt (14) from the Seat Frame (36).
Lift the Seat Frame off the Front Upright (42).
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (29), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
52
29
ING THE SEAT above).
Attach one end of the Chain (52) to the Short Cable
(58) with a Cable Clip (53). Attach the other end of
the Chain to the Eyebolt (35) with a Cable Clip.
53
58
35
LOCKING THE WEIGHT STACK
When the home gym system is not in use, the Lock
Pin (79) and Lock (80) should be attached. Insert the
Lock Pin through a Weight Guide (62). Attach the
62
Lock to the Lock Pin.
80
79
18