Weider WESY87100 User Manual page 14

26. Attach the Backrest (41) to the Front Upright
(42) with two 1/4" x 2 1/2" Screws (43) and
two 1/4" Flat Washers (10).
27. Press a 1 1/2" Square Inner Cap (32) into the
Seat Frame (36).
Insert the 1/4" x 2" Carriage Bolt (38) into the
centre hole in the Seat Plate (37). Attach the
Seat Plate to the Seat (13) with two 1/4" x
3/4" Screws (18).
Insert the 1/4" x 2" Carriage Bolt (38) into the
indicated hole in the Seat Frame (36). Tighten
a 1/4" Nylon Locknut (2) with a 1/4" Flat
Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the
Seat Frame (36) with a 1/4" Flat Washer (10)
and the 1/4" x 2" Screw (24).
28. Press a 1 1/2" Square Inner Cap (32) into the
Leg Lever (29).
Lubricate the 5/16" x 2 1/4" Bolt (33). Attach
the Leg Lever (29) to the Seat Frame (36)
with the 5/16" x 2 1/4" Bolt and a 5/16" Nylon
Locknut (3). Do not overtighten the Nylon
Locknut. The Leg Lever must be able to
pivot freely.
Insert the 5/16" x 2" Eyebolt (35) into the Leg
Lever (29) from the direction shown. Tighten
a 5/16" Nylon Locknut (3) with a 5/16" Flat
Washer (8) onto the Eyebolt.
26
43
27
36
24
28
Lubricate–33
14
42
41
10
13
38
37
18
10
2
36
29
35
8
32
32
3
3