Zanussi ZFU27400WA User Manual page 11

Hide thumbs Also See for ZFU27400WA:
Table of Contents

Advertisement

the wall unit must be at least 100 mm . Ideally,
however, the appliance should not be posi-
tioned below overhanging wall units. Accurate
levelling is ensured by one or more adjustable
feet at the base of the cabinet.
Warning! It must be possible to
disconnect the appliance from the mains
power supply; the plug must therefore be easily
accessible after installation.
A
Rear spacers
You can find the two spacers in the bag with
documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
www.zanussi.com
B
4
Electrical Connection
Caution! Any electrical work required to
install this appliance should be carried out
by a qualified electrician or competent person.
Warning! This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be observed.
1
5
Important! The wires in the mains lead are
coloured in accordance with the following
code:
2
1
3
2
3
4
11

Advertisement

Table of Contents
loading

Table of Contents