Atv Manual Tuning; Tuning - Toshiba 55VL900A Owner's Manual

SETTING UP YOUR TV

ATV Manual Tuning

The television can be tuned-in manually using ATV
Manual Tuning. For example, you might use the
feature if the television cannot be connected to a
media recorder/decoder with a SCART lead or when
you want to tune-in a station on another System.
Use C and c to move across the screen and select
any of the ATV Manual Tuning options. Then use B
or b to adjust the settings.
ATV Manual Tuning
System
1
I A C 2
1 2 3 4 5 6
1
Position
The number to be pressed on the remote
control to tune the channel.
2
System
Specifi c to certain areas.
3
Colour System
Factory set to Auto, should only be changed if
problems are experienced, i.e. NTSC input from
external source.
4
Skip
Set Skip to On ( 8 ) or Off ( ( ) for the selected
channel. See page 21.
5
Signal Class
The channel classifi cation.
6
Channel
The channel number on which a station is being
broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is
experienced. See page 64.
9
Station
Station identifi cation. Use the B b and C c
buttons to enter up to seven characters.
To allocate a position on the television for a decoder
and media recorder: turn the decoder on, insert a
pre-recorded fi lm in the media recorder, press PLAY
and manually tune.

Tuning

0 V C R
7 8 9
a
In the System Setup menu, press b to
select ATV Manual Tuning and press OK.
System Setup
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Colour System
Quick Setup
Location
b
Use B or b to select the desired position.
We suggest Pos. 0 for a media recorder.
ATV Manual Tuning
Pos. Channel
1 C2
2 C4
C5
3
4
C7
5
C9
6
C12
7
C23
8
C27
Diff erent Channel numbers may be displayed.
c
Press OK to select. If the channel chosen for
the media recorder is set to skip, Skip should
be removed before storing.
d
Press c to select System and press B or b
to change if required.
ATV Manual Tuning
System
1 I A
e
Then press c to select Search.
f
Press B or b to begin the search. The search
symbol will fl ash.
ATV Manual Tuning
Search
1 I A
g
Each signal will show on the television. If it is
not your media recorder, press B or b again
to restart the search.
h
When your media recorder signal is found,
press c to move along to Station. Use B , b ,
C and c to put in the required characters,
e.g. VCR.
ATV Manual Tuning
Station
1 I A
20
English
Station
C 2 0
C 2 0
C 2 0 V C R