Page 1
43/49/50/55/58 UL2B Series 43/49/50/55/58/65 UL3B Series 40/43/49/50/55/58/65 UL30 Series 40/43/49/50/55/58/65 UL20 Series 43/50/55/58/65 V20 Series 40/43/49/50/55/58 U20 Series 43/50/55/58/65 UL6B Series 43/50/55/58/65 UL4B Series 43/50/58 UK4B Series 43/49/55/65 UL5B Series 75 VL5B Series OPERATING INSTRUCTIONS...
Contents Environmental Information........2 Disposal Information ..........2 Standby Notifications ..........3 TV Control Switch & Operation (Optional) ....3 TV Control Button & Operation (Optional) ....3 Using Main TV Menu ..........4 Inserting the Batteries into the Remote ....5 Power Connection ...........
Environmental Information This television is designed to be environment friendly. To reduce energy consumption, you can follow these steps: If you set the Energy Saving to Minimum, Medium, Maximum or Auto the TV will reduce the energy consumption accordingly. Set as Off to turn this setting off. If you like to set the Backlight to a fixed value set as Custom and adjust the Backlight (will be located under the Energy Saving setting) manually using Left or Right buttons on the remote.
To change source: Press the middle of the switch in Standby Notifications twice(for the second time in total), the source list will If the TV does not receive any input signal (e.g. from appear on the screen. Scroll through the available aerial or HDMI source) for 3 minutes, it will go...
• Then press the button consecutively to move the Input Selection focus to the desired option if needed. Once you have connected external systems to your • Press and hold the button for about 2 seconds to TV, you can switch to different input sources. Press the activate the selected option.
2.3. Channels 5. Sources You can access the Channels menu using this option. You can manage your input source references using Refer to Using the Channel List section for more the options of this menu. To change the current source information.
Antenna Connection Connect the aerial or cable TV plug to the AERIAL INPUT (ANT) socket or satellite plug to the SATELLITE INPUT (LNB) socket located on the rear side of the TV. Rear side of the TV 1. Satellite 2. Aerial or cable If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection.
Remote Control Standby: Switches On / Off the TV Source: Shows available broadcast and content sources Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. Language: Switches among sound modes (analogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) Menu: Displays TV menu...
Remote Control- 2 (Optional) Standby: Switches On / Off the TV Menu: Displays TV menu Volume +/- Guide: Displays the electronic programme guide Directional buttons: Helps navigate menus, content etc. and displays the subpages in TXT mode when pressed Right or Left OK: Confirms user selections, holds the page (in TXT mode), views Channels menu (DTV mode) Back/Return: Returns to previous screen, previous...
Connections See the illustrations on the left Connector Type Cables Device side. You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You cannot use VGA and YPbPr at the same time. To Connection enable PC/YPbPr audio, you will (back) need to use the back audio inputs with a YPbPr/PC audio cable for...
On the second screen set your country preference. Switching On/Off - Control Switch (Optional) Depending on the Country selection you may be asked To Switch the TV On to set and confirm a PIN at this point. The selected PIN cannot be 0000.
Page 12
option will be checked. To turn the search option off If you set the Install Type as Standard, you can clear the checkbox by pressing OK after moving the continue with regular satellite installation and watch focus on the desired broadcast type option. satellite channels.
While the search continues a message may appear, not be responsible for any file damage or data loss. asking whether you want to sort channels according Certain types of USB devices (e.g. MP3 Players) to the LCN(*). Select Yes and press OK to confirm. or USB hard disk drives/memory sticks may not be compatible with this TV.
Page 14
Please note that any commercial use of the recording Recording Settings function could lead to copyright infringement of authors' rights. Toshiba asks you to respect the You can configure your recording preferences using the intellectual property rights of third parties.
the information bar and press OK. Select Options Media Browser and press OK to enter. Set Boot Logo option will be You can play back music and movie files and display available. Highlight it and press OK again to choose the photo files stored on a USB storage device by image as custom boot logo.
System Audio Control By using the directional buttons select a desired category. Every category includes different topics. Allows an Audio Amplifier/Receiver to be used with Select a topic and press OK to read instructions. the TV. The volume can be controlled using the re- To close the E-Manual screen press the Exit or Menu mote control of the TV.
Page 17
Settings Menu Content Picture Menu Content You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic Mode and Natural. Dolby Vision Modes (optional): If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture mode options will be available instead of Cinema and Natural modes.
Page 18
Films are recorded at a different number of frames per second to normal television Film Mode programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly. Skin Tone Skin tone can be changed between -5 and 5. Colour Shift Adjust the desired colour tone.
Page 19
Digital Out Sets digital out audio type. When you connect an external amplifier to your TV using the headphone jack, you can select this option as Lineout. If you have connected headphones to the TV, set this Headphone/ option as Headphone. Lineout Please ensure before using headphones that this menu item is set to Headphone.
Page 20
When you connect an external amplifier to your TV using the headphone jack, you can select this option as Lineout. If you have connected headphones to the TV, set this Headphone/ option as Headphone. Lineout Please ensure before using headphones that this menu item is set to Headphone. If it is set to Lineout, the output from the headphone socket will be set to maximum which could damage your hearing.
Page 21
Installation Menu Content Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations. Automatic channel D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores scan (Retune) analogue stations. Satellite: Searches and stores satellite stations. Manual channel This feature can be used for direct broadcast entry.
Page 22
System Menu Content (Optional) Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Manage your privacy privileges for smart TV related applications. Press OK to enter Privacy Settings (*) the menu and set according to your preferences.
Page 23
More Displays other setting options of the TV. Menu Timeout Changes timeout duration for menu screens. Standby LED If set as Off the standby LED will not light up when the TV is in standby mode. HBBTV (*) You can enable or disable this feature by setting it as On or Off. Software Ensures that your TV has the latest firmware.
Page 24
System Menu Content (Optional) Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Manage your privacy privileges for smart TV related applications. Press OK to enter Privacy Settings (*) the menu and set according to your preferences.
Page 25
Enables or disables Alexa On Standby feature. If enabled Alexa will be available while Alexa On the TV is in standby mode. Standby Note: This feature may affect your TV’s power consumption. Alexa Alarm Sets the volume level for Alexa alarms. Volume Sign Out You can use this option to sign out.
Note: If the country option in the First Time Installation is General TV Operation set as France, Italy or Austria, Maturity Lock’s value will be set to 18 as default. Using the Channel List Child Lock: If this option is set to On, the TV can only The TV sorts all stored stations in the channel list.
Highlight Extras tab and press OK to access below Teletext Services options. Press the Text button to enter. Press again to activate Highlight Genre: Displays Highlight Genre menu. mix mode, which allows you to see the teletext page Select a genre and press OK. The events in the and the TV broadcast at the same time.
No picture PC Input Typical Display Modes • TV is not receiving any signal. Make sure the correct The following table is an illustration of some of the source has been selected. typical video display modes. Your TV may not support •...
Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x480 800x600 1024x768 1280x768 1280x960 1360x768 1366x768 1280x1024...
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth and display the result when complete. To Connect to a Wired Network Advanced Settings • You must have a modem/router connected to an active broadband connection.
Page 34
• The location where the transmission is most effective Other Information differs depending on the usage environment. The status of the connection will be displayed as Connected or Not Connected and the current IP • The Wireless feature of the TV supports 802.11 a,b,g &...
Page 35
Image transfer and audio streaming Wireless Display You can also use Bluetooth connection to transfer Wireless Display is a standard for streaming video and images or stream audio from your mobile device to sound content. This feature provides the ability to use your TV.
If the wireless network does not function properly, try 1. Server Software Installation using the wired network in your home. Refer to the The Audio Video Sharing feature cannot be used if the Wired Connectivity section for more information on server programme is not installed onto your PC or if the process.
Your TV does not support any download processes Third party internet services may change, be discontinued or restricted at any time. from the internet via the browser. Internet Browser All sites on the internet might not be supported. According to the site; content problems may occur. To use the internet browser, enter the Apps menu first.
may not work on a teletext application where the retrieved from your TV and click on thumbnails to view numbers indicate teletext pages. the detail pages. RECORDINGS: You can view your active recordings(if HbbTV requires AV streaming capability for the platform.
VIDEOS: Provides videos on Youtube related to the Smart Center app.(to be found on online selected programme. application stores based on Android and iOS platforms) Note: For some functions an internet connection may be required. Router modem FollowMe TV Feature (if available) USB storage device in FAT32 format (required for USB Recording feature, if available) Tap on the FOLLOW ME TV widget located at the...
Here are some voice commands that you can use: Alexa Ready (Optional) Alexa is Amazon’s cloud-based voice service available Command Function on many voice controlled assistant devices. By means Alexa, turn on ‘FN’ Powers on the TV of the Alexa built-in and Works With Alexa features you Alexa, turn off ‘FN’...
account first, if you are not already signed in. Then Command Function you will be directed to a page where you can enter The TV switches to the the authentication code you see on the TV and link Alexa, change channel to channel with the specified your TV to your Amazon account.
Page 42
Once the setup is complete, you will be able to control the functions of your TV with Google Assistant. Note: Make sure that the devices are connected to the internet. You can link only one TV to your account. Example Commands Here are some voice commands that you can use to control the functions of your TV with Google Assistant: Command...