CONTROLS AND FEATURES
c
Press OK to display Digital Audio Output
menu and press B or b to select an option.
Audio Format:
Press C or c to select PCM or Auto.
PCM:
This mode outputs PCM format
to the digital audio output
socket.
Auto:
This mode outputs Dolby Digital
(if available) or PCM to the digital
audio output socket.
Dolby Digital S Dolby Digital
Dolby Digital Plus S Dolby Digital
MPEG S PCM
HE-AAC S Dolby Digital
Audio Delay:
Press C or c to select Auto or Manual.
Auto:
This mode automatically adjusts
the audio timing to meet the
video timing.
NOTE: The time lag might
be large between the image
and sound depending on the
connected equipment (amplifi er
etc.). In that case, select Manual.
Manual: You can manually adjust the
audio signal timing to meet the
video signal timing.
Delay Adjustment:
Press C or c to adjust the audio signal
timing (0 – 250ms) to meet the video signal
timing.
NOTE:
•
This feature is grayed out when
Delay is in Auto.
•
A time lag will occur when the video signal
or audio signal is changed. Adjust the
timing accordingly.
•
When adjusting the timing, turn down the
volume of the AV equipment used as far
as possible. Depending on the equipment,
noise etc. may occur when the signal is
changed.
•
Depending on the connected equipment
(amplifi er, etc.), adjustment may not be
possible.
•
When the optical digital output setting
(Auto t PCM) is changed, it may be
necessary to adjust the timing again.
•
Do not use other than for audio output
from the AV amplifi er, etc. (Malfunction
may occur)
Using REGZA-LINK
This is a new feature that uses CEC technology
and allows you to control Toshiba REGZA-LINK
compatible devices from the television remote
control via HDMI connection (page 12).
When the Enable REGZA-LINK item in the REGZA-
LINK Setup menu is set to On, individual functions
also set to On will be activated.
a
b
c
d
Audio
The TV Auto Power setting allows the television to
be automatically switched on if a REGZA-LINK device
a
b
When Auto Standby is enabled, the television, when
switched off , will automatically switch off (standby
mode) all connected REGZA-LINK equipment.
a
b
60
Enable REGZA-LINK
Press MENU / C c to highlight Setup icon.
Press B / C c to highlight Preferences icon
and press OK.
Press B or b to select REGZA-LINK Setup
and press OK.
Press b to select Enable REGZA-LINK and
press C or c to select On.
REGZA-LINK Setup
Enable REGZA-LINK
TV Auto Power
Auto Standby
Amplifier Control
Initial Speaker Setting
NOTE: If you set Enable REGZA-LINK to Off ,
all other items will be grayed out.
TV Auto Power
is turned on.
In the REGZA-LINK Setup menu, press b to
highlight TV Auto Power.
Press C or c to select On or Off .
Auto Standby
In the REGZA-LINK Setup menu, press b to
highlight Auto Standby.
Press C or c to select On or Off .
On
On
On
On
TV Speakers