Dns Setup - Toshiba 55VL900A Owner's Manual

CONTROLS AND FEATURES
d
Highlight Auto Setup and press C or c to
select On.
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
NOTE: Other items will be grayed out when Auto
Setup is set to On.
Manual Setup:
a
In the Preferences menu, press B or b to
select Network Setup and press OK.
b
Press B or b to select Advanced Network
Setup and press OK.
c
Press B or b to select IP Address Setup and
press OK.
d
Highlight Auto Setup and press C or c to
select Off .
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
e
Press B or b to select IP Address.
f
Press C or c to highlight the fi eld you
want to change, and then use the number
buttons to input the IP address. To save the
setting, press OK.
NOTE: IP address fi eld numbers must be
between 0 and 255. After each fi eld number
has been set, press OK to store the entire
address. If the entire IP Address is invalid,
a warning message will appear after OK is
pressed.
g
Press B or b to select Subnet Mask, and
edit in the same way as IP Address.
IP Address Setup
Auto Setup
IP Address
Subnet Mask
Default Gateway
h
Press B or b to select Default Gateway,
and edit in the same way as IP Address.
NOTE: If you manually set the IP address, you must
not use the same IP address for any other device.
The IP address you use should be a private address.
On
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
. . .
Off
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
Off
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
NOTE: When the DHCP function of the router
connected to this TV is Off , set Auto Setup to Off ,
and manually set the DNS address(es). Your internet
service provider should have provided these to you.
Auto setup:
a
In the Preferences menu, press B or b to
select Network Setup and press OK.
b
Press B or b to select Advanced Network
Setup and press OK.
c
Press B or b to select DNS Setup and press
OK.
d
Press B or b to highlight Auto Setup and
press C or c to select On.
NOTE: Other items will be grayed out when Auto
Setup is set to On.
Manual setup:
a
In the Preferences menu, press B or b to
select Network Setup and press OK.
b
Press B or b to select Advanced Network
Setup and press OK.
c
Press B or b to select DNS Setup and press
OK.
d
Press B or b to select Auto Setup and press
C or c to select Off .

DNS Setup

Auto Setup
Primary DNS Address
Secondary DNS Address
e
Press B or b to select Primary DNS
Address.
f
Press C or c to highlight the fi eld you
want to change, and then use the number
buttons to input the Primary DNS Address.
To save the setting, press OK.
NOTE: DNS address fi eld numbers must
be between 0 and 255. If you input an
incompatible number and press OK, the
fi eld number will reset to the previous value.
g
Press B or b to select Secondary DNS
Address, and edit in the same way as
Primary DNS Address.
40
DNS Setup
Off
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx