Colour Temperature; Auto Brightness Sensor; Active Backlight Control; Black/White Level - Toshiba 55VL900A Owner's Manual

CONTROLS AND FEATURES
b
Press B or b to select an option and press c
to move to the adjustment window.
Base Colour Adjustment
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
c
Press C or c to select Hue, Saturation or
Brightness and press B or b to adjust the
settings as required.
Red
d
Press BACK to return to the previous menu.
To return to the factory settings, select
Reset and press OK.

Colour Temperature

Colour Temperature increases the 'warmth' or
'coolness' of the picture by increasing the red or blue
a
In the Advanced Picture Settings menu,
press B or b to select Colour Temperature
and press OK.
b
Press B or b to select Colour Temperature
and press C or c to select Cool, Natural or
Warm to suit your preference.
c
Press B or b to select Red Level, Green
Level or Blue Level and press C or c to
adjust the level.
NOTE: To return the adjustments to the factory
defaults, select Reset and press OK.

Auto Brightness Sensor

When the Auto Brightness Sensor is activated, it will
automatically optimise the backlighting levels to suit
ambient light conditions.
a
In the Advanced Picture Settings menu,
press B or b to select Auto Brightness
Sensor.
b
Press C or c to select On or Off .
Hue Saturation Brightness
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Hue Saturation Brightness
0 0 -1
tint.

Active Backlight Control

When the Active Backlight Control feature is
activated, it will control the backlighting levels
depending on various scenes such as picture motion,
bright scene or dark scene.
a
In the Advanced Picture Settings menu,
press B or b to select Active Backlight
Control.
b
Press C or c to select High, Low or Off .
High:
Low:

Black/White Level

Black/White Level increases the strength of dark
areas of the picture to improve the defi nition.
a
In the Advanced Picture Settings menu,
press B or b to select Black/White Level.
b
Press C or c to select High, Middle, Low or
Off .
MPEG NR – Noise Reduction
When watching a DVD, the compression may cause
some words or picture elements to become distorted
or pixelated. Using the MPEG NR feature reduces this
eff ect by smoothing out the edges.
a
In the Advanced Picture Settings menu,
press B or b to select Noise Reduction and
press OK.
b
Press b to select MPEG NR.
Noise Reduction
MPEG NR
DNR
c
Press C or c to select Low, Middle, High or
Off to suit your preference.
34
To control the backlighting levels
depending on various scenes
such as picture motion, bright
scene or dark scene
To control the backlighting levels
for dark scene
Low
Auto