Setting The Auto Start Mode; Adjusting 2D To 3D Depth; Setting The 3D Pin Code - Toshiba 55VL900A Owner's Manual

To switch to Native mode:
• Press 3D while viewing 3D mode.
• Press 3D while viewing 2D to 3D mode.
NOTE: When 3D format signal with 3D Auto
Detect Information is received, it is not possible to
switch to Native.
• From the Quick Menu in 2D mode.
a
In the Quick Menu, press B or b to select
3D Settings and press OK.
b
Press B or b to select 2D Format Select
and press OK.
c
Press C or c to select Native.
NOTE: When Frame Packing is input, 2D
Format Select will be grayed out.
To switch to 2D to 3D mode:
Press 3D while viewing 2D or Native mode.
NOTE: Depending on the input mode, the display
mode switches between 2D and 3D.

Setting the auto start mode

Controls what the TV does when it detects a 3D signal.
a
Press MENU / C c to highlight Setup icon.
b
Press B / C c to highlight Preferences icon
and press OK.
c
Press B or b to select 3D Setup and press
OK.
Preferences
3D Setup
REGZA-LINK Setup
Network Setup
Network Device Setup
Teletext
Network Lock
Panel Lock
Display Settings
d
Press B or b to select 3D Auto Start.
e
Press C or c to select 3D, 2D, or Off .
Option
3D Displays as 3D mode automatically
when 3D format signal is received.
2D Displays as 2D mode automatically
when 3D format signal is received.
Off Displays a screen that allows you to
select 3D or 2D when 3D format signal is
received.
Auto
Off
Off
Description

Adjusting 2D to 3D Depth

You can adjust the level of 3D.
From the Menu:
a
In the Preferences menu, press B or b to
select 3D Setup and press OK.
b
Press B or b to select 2D to 3D Depth and
press OK.
c
Press C or c to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
eff ect.
From the Quick Menu:
a
Press QUICK on the remote to open the
Quick Menu.
b
Press B or b to select 2D to 3D Depth and
press OK.
c
Press C or c to select 1, 2, 3, 4, or 5.
The higher the number, the stronger the 3D
eff ect.
NOTE: Depending on the content, setting the 3D
eff ect to a high level may result in blurring of the
image contours and background.
If you experience any abnormal sensation or feel
fatigue or nausea when viewing 3D images, stop
watching and rest until the symptoms subside.
Before viewing again, adjust the 3D eff ect to a
lower number and view at a level at which the
symptoms do not occur.

Setting the 3D PIN code

A 3D PIN code is necessary for using 3D Safety
To enter a new PIN code:
a
In the Preferences menu, press B or b to
select 3D Setup and press OK.
b
Press B or b to select 3D PIN and press OK.
c
Press the number buttons to enter a 4-digit
number. Confi rm the code.
NOTE: PIN code cannot be set to "0000".
27
CONTROLS AND FEATURES
Settings.