Setting Up Your Tv; Startup Application; Quick Setup - Toshiba 55VL900A Owner's Manual

Startup Application

Before switching on the TV, make sure your
decoder/media recorder, if applicable, is in
standby. To set up the television, use the
buttons on the remote control as detailed on
page 9.

Quick Setup

a
Press the 1 button. The Menu Language
screen will appear. This screen will appear
the fi rst time that the television is switched
on and each time Reset TV is selected.
b
Press C or c to select the menu language
English or Français.
c
Press OK to display the Primary/Secondary
Language and Primary/Secondary Audio
Language item. Press B b C c to select
the language as desired.
Quick Setup
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
d
Press OK, and the Time Zone screen will
appear.
Time Zone
e
Press C or c to select Time Zone.
f
Press OK, and the Location screen will
appear.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is
recommended for normal use.
g
Press C or c to select Home or Store. For
normal home use, select Home.
h
Press OK, and the AutoView screen will
appear, press C or c to select Yes or No.
AutoView
AutoView mode automatically adjusts picture
settings to suit ambient light conditions. Do you
wish to enable AutoView mode?
English
French
English
French
New South Wales
Home
No
i
Press OK, and the Network Setup screen
will appear. Press C or c to select Yes or No.
Network Setup
Do you want to configure network setup?
• When you select
j
Press OK, and the Network Type screen
will appear. Press C or c to select Wired or
Wireless.
Network Type
Please select a network type.
• When you select
connection), skip to step 14.
• When you select
adaptor connection), follow step 11.
NOTE: If the USB WLAN adaptor is not
connected, Network Type screen does not
display and skip to step 14.
k
Press OK, and the Wireless Setup screen
will appear. Press C or c to select the
Wireless Setup type.
• Assisted Setup
Input the Security Key only.
• Manual Setup
Input the all settings.
Wireless Setup
Please select a kind of wireless network.
NOTE: EXIT is available during settings.
l
In step 11, when you select Assisted Setup;
Press OK, and the Assisted Setup screen
will appear. Press B or b to select the
desired AP and press OK.
NOTE: Check the MAC address on the label of
the AP or in the manual, and select your AP.
Press B or b to select Security Key and
press OK.
The Software Keyboard window will appear
(page 41).
Input the Security Key by using the Software
Keyboard.
To save your setting, press the BLUE button.
17

SETTING UP YOUR TV

Yes
No, skip to step 17.
Wired
Wired (LAN cable
Wireless (USB WLAN
- follow step 12.
, skip to step 13.
Assisted Setup