Table of Contents
Advertisement
SETTING UP YOUR TV
For Satellite Tuning:
A screen will appear warning that previous
programmes and settings will be deleted.
Auto Tuning
Previous settings will be lost! Press EXIT for no
change.
Start Scan
Satellite
Search Option
Press B or b to highlight Satellite and then press C or
c to select the desired satellite (No.1 Sat ~ No.4 Sat
or All).
You can select Free to Air or All as the Search Option.
Highlight Start Scan and press
the Auto Tuning.
When the search is complete, the Auto Tuning screen
will display the services found.
c
b
B
Use
or
to move through the list to select a
channel, and then press
All
Free to Air
Q
to continue with
Q
to view.
ATV Manual Tuning
The television can be tuned-in manually using ATV Manual
Tuning. For example, you might use the feature if the television
cannot be connected to a media recorder/decoder with a SCART
lead or when you want to tune-in a station on another System.
C
c
Use
and
to move across the screen and select any of the
ATV Manual Tuning options. Then use
settings.
ATV Manual Tuning
System
1
I
A
C
1 2 3 4
5
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
8
Set Skip to On (
See page 21
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 74.
9
Station
Station identification. Use the
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
20
Tuning
B
b
or
to adjust the
2
0
V C R
6
7 8
9
(
) or Off (
) for the selected channel.
B
b
C
or
and
or
c
buttons
Advertisement
Table of Contents
