NordicTrack NTEX14807.1 User Manual page 6

1.
To make assembly easier, read the
information on page 5 before you begin
assembling the exercise cycle.
Orient the Front Stabilizer (15) with the Wheels (17)
positioned as shown. Attach the Front Stabilizer to
the Frame (1) with two M10 x 94mm Button Bolts
(65), two M10 Curved Washers (94), and two M10
Nylon Locknuts (91).
2. While another person lifts the rear of the Frame (1),
attach the Rear Stabilizer (16) to the Frame with
two M10 x 94mm Button Bolts (65), two M10
Curved Washers (94), and two M10 Nylon Locknuts
(91).
3. Orient a Backrest Tube (52) as shown. Insert the
Backrest Tube into a bracket on the Seat Carriage
(41). Attach the Backrest Tube with an M8 x 35mm
Button Bolt (72), an M8 Split Washer (93), and an
M8 Nylon Locknut (99). Make sure that the Nylon
Locknuts are in the hexagonal holes in the Seat
Carriage. Do not tighten the Button Bolt yet.
Repeat this step to attach the other Backrest
Tube (52).
1
1
91
2
94
65
3
52
93
72
6
17
65
94
17
15
91
91
1
16
52
41
99