Hitron CDA-RES User Manual page 44

4
Disconnect and re-connect the power adaptor to the power source and the CDA-
RES.
5
If none of the above steps solve the problem, consult your vendor.
Problem: One of the LEDs does not Display as Expected
1
Ensure that you understand the LED's normal behavior (see
2
Ensure that the CDA-RES's hardware is connected correctly; see the Quick
Installation Guide.
3
Disconnect and re-connect the power adaptor to the CDA-RES.
4
If none of the above steps solve the problem, consult your vendor.
Problem: I Forgot the CDA-RES's IP Address
1
The CDA-RES's default LAN IP address is 192.168.100.1.
2
You can locate the CDA-RES's GUI by entering the LAN domain suffix into your
browser's address bar (on a computer connected to the LAN).
3
Depending on your operating system and your network, you may be able to find
the CDA-RES's IP address by looking up your computer's default gateway. To
do this on (most) Windows machines, click Start > Run, enter "cmd", and then
enter "ipconfig". Get the IP address of the Default Gateway, and enter it in your
browser's address bar.
4
If you still cannot access the CDA-RES, you need to reset the CDA-RES. All
user-configured data is lost, and the CDA-RES is returned to its default settings.
Problem: I Forgot the CDA-RES's Username or Password
1
The default username is cusadmin, and the default password is password.
2
If the default username and password do not work, you need to reset the CDA-
RES. All user-configured data is lost, and the CDA-RES is returned to its default
settings.
44 44 Version 1.1, 03/2014. Copyright
Version 1.1, 03/2014. Copyright
Hitron CDA-RES User's Guide
LEDs
2012 Hitron Technologies
2014 Hitron Technologies
TROUBLESHOOTING
on page 14).