Table 2: Hardware Connections - Hitron CDA-RES User Manual

Table 2: Hardware Connections
Reset
LAN
13 13 Version 1.1, 03/2014. Copyright
Version 1.1, 03/2014. Copyright
Hitron CDA-RES User's Guide
Use this button to reboot or reset your CDA-RES.
Press the button and hold it for less than five seconds
to reboot the CDA-RES. The CDA-RES restarts,
using your existing settings.
Press the button and hold it for more than five
seconds to delete all user-configured settings and
restart the CDA-RES using its factory default
settings. See Resetting the CDA-RES
more information on resetting the CDA-RES.
NOTE: Unless you previously backed-up the CDA-
RES's configuration settings prior to resetting the
CDA-RES, the settings cannot be recovered.
Use these ports to connect your computers and other
network devices, using Category 5 or 6 Ethernet cables
with RJ45 connectors.
on page 21
2012 Hitron Technologies
2014 Hitron Technologies
INTRODUCTION
for