LOADING A CD IN THE SINGLE PLAY SLOT
The single play slot lets you easily load a single CD. To
load a CD in the single play slot, press
The CD changer turns on if it was turned off,
ACCESS.
and rotates the rack so the single play slot comes to the
loading position. Insert the CD with its label to the left.
Then press
SINGLE PLAY/PLAY
To remove a CD from the single play slot, press
The rack rotates the single play slot to the
PLAY/ACCESS.
front. When the rack cover opens, remove the CD.
The single play slot is numbered as
between discs
and
100
pressing
DISC NUMBER
2 when the display shows 1. You can
or
DISC NUMBER
also reach to the single play slot by pressing 0 on the
remote control. The display shows the disc number as P0.
8
SINGLE PLAY/
to start playing.
SINGLE
and is located
"0"
You can access this slot by
1.
3 when the display shows 100,
USING THE DEMO
The demo showcases the features of your CD-9400 and
its display. To turn on the demo, press 4 1 within
second of turning on the CD changer. To turn off the
demo, press any button.
1