Basic Operating Instructions; Using The Remote Control; Loading Cds In The Rack - RCA CD-9400 Owner's Manual

BASIC OPERATING INSTRUCTIONS

Warning: To protect your hearing, set the volume on your
receiver or amplifier to its lowest level before you load and
play a CD.
Caution: Do not set the volume on your receiver or
amplifier too high while playing soft or quiet portions of a
music program. Due to the CD changer' s wide dynamic
range, the speakers might be damaged if the music program
includes a sudden loud passage.

USING THE REMOTE CONTROL

Many of the CD changer' s buttons also have a
corresponding button on the remote control, and you can
use either the CD changer or the remote control to control
the function.
To use the remote control, point it at the infrared sensor
on the front panel and press the control button.
When the remote control' s operating distance reduces or if
the remote control stops working, replace the batteries.
Note: The remote operates the CD changer from up to 23
feet away and within 30º of the front of the CD changer.

LOADING CDS IN THE RACK

The multi-disc rack holds 100 CDs. The disc slots are
numbered in clockwise order, from 1 to 100, and can hold
either 3-inch or 5-inch CDs.
Follow these steps to load up to 100 CDs in the slots.
1. Press to turn on the CD changer. If necessary,
POWER
repeatedly press 2
DISC NUMBER
on the remote) so the slot number you want appears
on the display.
MODE HI-LITE
RANDOM BEST PREVIOUS
CLEAR PROGRAM DISC NUMBER
REPEAT
PLAY/PAUSE STOP ASMS/SEARCH
6 7
4 1 ¡ ¢
OPEN/
UNLOAD
CLOSE
CD • DECK SYNCHRO SYSTEM
2. Press to open the rack cover.
UNLOAD
MODE HI-LITE
CLEAR PROGRAM
OPEN/
UNLOAD
CLOSE
3 (or 2
DISC
DISC
ASMS
RANDOM
RANDOM BEST PREVIOUS
DISC NUMBER
REPEAT
PLAY/PAUSE STOP ASMS/SEARCH
6 7
4 1 ¡ ¢
CD•D DECK SYNCHRO SYSTEM
Note: Always handle CDs by their edges. Fingerprints and
scratches on a CD' s surface can prevent the laser beam from
correctly reading the digital information. For more
information, see "CD Care Tips" on Page 15.
3. Hold the CD vertically and insert it into the CD slot,
label side to the left.
.
4. To load more CDs, repeatedly press2
3 (or 2
number appears on the display. Then repeat Step 3.
5. When you finish loading the desired CDs, press
to close the rack cover.
CLOSE
To remove a CD, select the slot number of the disc you want
to remove, then press
selected disc slot to the front. When the rack cover opens,
remove the selected CD. Press
cover.
Cautions:
• Do not try to manually open the rack cover; only use
OPEN/CLOSE.
• Do not load anything other than 5-inch or 3-inch CDs
into the slots. This could damage the CD changer.
• Do not use an adapter for 3-inch CDs. Also, avoid
placing 3-inch CDs between 5-inch CDs as this makes
it hard to remove the 3-inch CDs.
3
• The CD changer does not play with the rack cover open.
Notes:
• You can use
remove the disc if the disc to remove is already at the
front of the rack. The display shows HOLD while the
rack cover is open.
• You can open the rack cover even while a disc is
playing. Hold down
shows OPEN. The rack cover opens and the display
shows HOLD. In this case, the rack does not rotate
and you cannot use
or 2
DISC NUMBER
3 on the remote) so the desired rack
DISC
The rack rotates the
UNLOAD.
OPEN/CLOSE
to open the rack cover and
OPEN/CLOSE
until the display
OPEN/CLOSE
UNLOAD, SINGLE PLAY/ACCESS,
3.
DISC NUMBER
OPEN/
to close the rack
7