Obtaining The Access Point/Bridge Image File; Obtaining The Tftp Server Software - Cisco Aironet 1300 Series Hardware Installation Manual

Chapter 7 Troubleshooting

Obtaining the Access Point/Bridge Image File

You can obtain the access point/bridge image file from the Cisco.com software center by following these
steps:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Click Option 2: Aironet Wireless Software Display Tables.
Step 12
Find the access point firmware and utilities section and click Cisco Aironet 1300 Series (Cisco IOS
Step 13
Software).
Click on the access point/bridge image file, such as c1310-k9w7-tar.123-4.JA.tar.
Step 14
On the Encryption Authorization Form, enter the requested information, read the encryption
Step 15
information, and check the boxes that apply.
Click Submit.
Step 16
Read and accept the terms and conditions of the Software License Agreement.
Step 17
Select the image file again to download it.
Step 18
Step 19 Download and save the image file to your hard drive and then exit the web-browser.

Obtaining the TFTP Server Software

You can download TFTP server software from several web sites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.
OL-5048-02
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Reloading the Access Point/Bridge Image
7-13