Aligning The Bridge Antenna Using Rssi Led Indications - Cisco Aironet 1300 Series Hardware Installation Manual

Outdoor access point/bridge
Hide thumbs Also See for Aironet 1300 Series:
Table of Contents

Advertisement

Chapter 3
Mounting and Alignment Overview

Aligning the Bridge Antenna Using RSSI LED Indications

You can align the integrated antenna using LEDs after the unit successfully associates with a remote
bridge. In the installation mode before association to another bridge, the Install LED blinks amber. If the
unit associates to a root bridge, the Install LED turns amber. If the unit does not associate to a root bridge
in the first 60 seconds, the Install LED blinks green to indicate that beacons are being transmitted and
that the unit is waiting for another non-root bridge to associate.
During the first 20 seconds after association, the unit reads the receive signal strength indictor (RSSI)
levels and records the maximum level received. After 20 seconds have elapsed, the Install LED turns
amber and the Ethernet, status, and radio LEDs display the relative RSSI levels compared to the
maximum received. The RSSI LED indications are shown in
Note
For the signal level (dBm), a smaller number represents a stronger signal because the signal level is given
as a negative value.
Table 3-3
RSSI Level (dBm)
> –44
–47 to –44
–50 to –47
–53 to –50
–54 to –53
–57 to –54
–60 to –57
–63 to –60
–66 to –63
–69 to –66
–72 to –69
–75 to –72
< –75
1. Slow blinking rate of 1 blink/sec.
2. Medium blinking rate of 2 blinks/sec.
3. Fast blinking rate of 4 blinks/sec.
When using LEDs to maximize the signal, adjust the antenna until as many LEDs as possible are turned
on and the rest are blinking as fast as possible.
OL-5048-02
Bridge LED Installation Mode RSSI Display
Ethernet LED
On
1
Fast blink
2
Medium blink
3
Slow blink
Off
Off
Off
Off
Off
Off
Off
Off
Off
Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide
Aligning the Bridge Antenna Using RSSI LED Indications
Table
3-3).
Status LED
Radio LED
On
On
On
On
On
On
On
On
On
On
1
Fast blink
On
2
Medium blink
On
3
Slow blink
On
Off
On
Off
Fast blink
Off
Medium blink
Off
Slow blink
Off
Off
1
2
3
3-7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Air-br1310g-a-k9Air-br1310g-a-k9-r

Table of Contents