Nortel CallPilot 150 Administration Manual page 74

74 Chapter 7 Working with CCR Trees
x
MENU INFO
x
XFER LVMSG
Transfer
EXT INT
Outdial: <line>
CHNG
xxxx:
RETRY
Accept: x
RETRY
Ph:
RETRY
xxxxxxx
ADD
Path:
RETRY END
Tree: x
SAVE PRINT
Save as tree x
YES OTHR
Tree saved
CCR Admin
ADMIN
P0919416 03
8 Press OTHR.
OTHR
9
Press XFER.
OTHR
10 Press EXT.
11 Press NEXT if you want to use a line as the outdialing method
NEXT
or
press CHNG if you want to select a line within a line pool.
Press CHNG again if you want to select a route.
12 Enter the line or pool number and press OK.
OK
Although line pools are labeled by a letter such as A, B, or C, the
system accepts only numbers such as 1, 2, or 3. When you enter a
line pool use 1 for A, 2 for B, 3 for C, and so on.
13 Press OK to accept the line or pool number.
OK
14 Enter a destination telephone number up to 30 digits and press OK.
OK
15 Press OK to accept the destination phone number
OK
or
press ADD to add more digits.
Refer to "Adding special characters to an external transfer number"
on page 75
16 Press END.
OK
17 Press SAVE.
QUIT
18 Press YES.
QUIT
19 This display appears briefly.
20 Press ® to end the session.
for more information.