Nortel CallPilot 150 Administration Manual page 26

26 Chapter 4 Working with mailboxes
Outdial: <line>
CHNG
xxxx:
RETRY
Accept: x
RETRY
Alt1 ext:(none)
CHNG
Alt1 ext:
RETRY
Alt1 ext: xx
CHNG
Alt2 ext: (none)
CHNG
Alt2 ext:
RETRY
Alt2 ext:xx
CHNG
Msg line: (none)
CHNG
Msg line:
RETRY
Msg line: xx
CHNG
Xfers:blind
CHNG
Mailbox Admin
ADD DEL
P0919416 03
12 Press NEXT if you want to use a line
NEXT
or
press CHNG if you want to use a line within a line pool.
13 Enter the Line or Pool number and press OK.
OK
Line numbers must be between 1 and 500.
Although line pools are labelled by a letter such as A, B or C,
CallPilot accepts only numbers. If you enter a line pool use 1 for A,
2 for B, 3 for C, and so on.
14 Press OK.
OK
15 Press CHNG if you want to assign an Alternate extension
NEXT
or
press NEXT if you do not want to assign an Alternate extension and
go to step 21.
16 Enter the Alternate extension and press OK.
OK
17 Press NEXT.
NEXT
18 Press CHNG if you want to assign another Alternate extension
NEXT
or
press NEXT and go to step 21.
This display does not appear unless you assigned an Alternate
extension.
19 Enter the second Alternate extension and press OK.
OK
20 Press NEXT.
NEXT
21 Press CHNG to assign an Express Messaging Line
NEXT
or
press NEXT and go to step 24.
22 Enter an Express Messaging Line number between 1 and 500
OK
and press OK.
23 Press NEXT.
NEXT
24 Press NEXT
NEXT
or
press CHNG if you want to enable Call Screening.
25 Press ® to end the session.
CHNG