Nortel CallPilot 150 Administration Manual page 30

30 Chapter 4 Working with mailboxes
Service class:
RETRY
Outdial: <none>
CHNG
Outdial: <line>
CHNG
xxxx:
RETRY
Accept: x
RETRY
Xfers:blind
CHNG
Proceed?
YES
Checking xx
Created x mbox
P0919416 03
6 Enter a Class of Service from 1 to 16.
OK
7
Press NEXT if you do not want to assign outdialing and go to step 11
NEXT
or
press CHNG.
8
Press NEXT if you want to use a line
NEXT
or
press CHNG if you want to use a line within a line pool.
9 Enter the Line or Pool number and press OK.
OK
Line numbers must be between 1 and 500.
Although line pools are labelled by a letter such as A, B or C,
CallPilot accepts only numbers. If you enter a line pool use 1 for A,
2 for B, 3 for C, and so on.
10 Press OK.
OK
11 Press NEXT
NEXT
or
press CHNG to enable Call Screening for the mailboxes.
12 Press YES.
QUIT
13 The display shows the numbers of the mailboxes that are being
created.
14 Press OK to end the session.
OK