Config; Erase; Help; Image - Nortel 5399 Hardware Installation Manual

Table 3-1. ROM Monitor Commands (continued)
Command

config

erase

help

image [-d | <file>]
lat_key [-d]
net
ping
ports [-d]
sequence [-d |
<list>]
stats
Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 3
Description
Displays the current
hardware configuration
and revision levels.
Erases non-volatile
memory.
Displays the list of ROM
Monitor commands.
Displays and/or sets the
load image and tftp load
dump names.
Sets the LAT key.
Executes an Ethernet
transceiver loopback
test.
Sends ICMP
ECHO_REQUEST
datagram to a host or
gateway.
Shows the current status
of a WAN interface port.
Displays and edits the
load/dump interface list.
Displays current network
statistics gathered by the
ROM.
ROM Monitor Commands
Use
Identifying your
hardware, memory, and
ROM versions.
Clearing out old
parameters.
Referencing the ROM
monitor commands.
Loading an image that
differs from the default.
Connecting to a DEC
VMS host.
Checking your Ethernet
connection.
Checking to see if a host
or gateway can be
reached.
Testing a WAN interface
port or modem hardware.
Checking or changing
the load/dump interface
list.
Checking the network
resources.
3-3