Installing A 7401-4Xxx On A Table Top Mount; Mounting Procedures - NCR EasyPoint 7401 Hardware User's Manual

4-18 Chapter 4: 7401-4xxx Hardware Installation

Installing a 7401-4xxx on a Table Top Mount

Mounting Procedures

A 7401-4xxx terminal attached to a Table Top Mount can be installed
on any flat work surface following the height guidelines shown in the
NCR EasyPoint 7401 Site Preparation Guide (B005-0000-1255).
Locking
Pin
Slots
1. Using the Table Top Mount as a template, position the Mount on
the surface where the terminal is to be located and mark all hole
locations with a pencil.
Note: To locate the 7401-4xxx terminal so the edge of the
Keyboard Tray is even with the edge of the table top, locate the
front edge of the Table Top Mount 210 mm (8.25 in.) from the edge
of the mounting surface.
Locating
Pins
Locking
Pin
Slots
19964