Table of Contents
Advertisement
Software Upgrade and Licences
Searching for New Software
If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the System Setup menu, press
Software Upgrade and press OK.
b
B
b
Press
or
to select Search for New Software.
c
Press OK. The television will automatically start
searching for a software upgrade, the progress bar
will move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
48 %...
If an upgrade is found, the television will
automatically start downloading. If not, a screen will
appear stating that an upgrade is unavailable.
Network Upgrade
TOSHIBA may offer upgrades for the TV's software in the future.
The TV's software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not be
able to watch the TV.
a
In the System Setup menu, press B or b to select
Software Upgrade and press OK.
b
Press B or b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.
Software Licences
The licences for the software used in this television are available
for viewing.
a
In the System Setup menu, press B or b to select
Software Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.
B
b
or
to select
CH
31
System Information and Reset TV
System Information
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes additional
diagnostic information such as signal strength, signal quality,
centre frequency, modulation, etc.
a
In the System Setup menu, press
System Information.
b
Press OK to display the System Information.
System Information
WEAK
CH 25
CH 33
CH 67
c
For information about the signal quality of a particular
multiplex, press
d
Press OK for a screen showing detailed technical
information about the selected multiplex.
Selecting Reset TV will reset all TV settings, including saved
channels, to their original factory values.
a
In the System Setup menu, press
Reset TV.
b
Press OK to select. A screen will appear warning that
all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup and
perform an auto tune. (See "Quick Setup" section on
page 16.)
73
CONTROLS AND FEATURES
B
b
or
to select
TOSHIBA
2012
6.8.05.1 Jan 19 2012 - 53. 5. 73. 5
MBOOT Version : xxxxxxxx
AVERAGE
STRONG
B
b
or
to select that multiplex.
Reset TV
B
b
or
to select
GOOD
GOOD
GOOD
Advertisement
Table of Contents
