Common Interface; Stored Cicam Pin; Software Upgrade And Licences; Searching For New Software - Toshiba M74 Series User Manual

Common Interface

The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
provider.
a
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
b
B
Press and
icon.
c
Press c and B / b
press OK.
d
B b
Press / to select Common Interface and
press OK.
e
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
• Some CI or CI+ CAM may not be supported.

Stored CICAM PIN

Stored the CICAM PIN is used for recording.
a
B
Press and
icon.
b
Press c and B / b
press OK.
c
B b
Press / to select Stored CICAM PIN and
press OK.
d
Input PIN code on the Stored CICAM PIN dialog
window and press Done.
NOTE: Note relating to cards for which the CAM PIN can
be changed through the Common Interface: If you change
the PIN through the Common Interface after setting the
stored PIN, it invalidates the stored PIN, which you must
change in a separate operation.
b
/ to highlight Installation
to select DTV Settings and
b
/ to highlight Installation
to select DTV Settings and
Software Upgrade and
Licences

Searching for New Software

If preferred, software upgrades can be searched for
manually using Search for New Software.
a
In the Get Help menu, press
Software Upgrade and press OK.
b
B b
Press /
press OK.
c
Press B / b
to select On, then press
for new Software and press OK.
SEARCH FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
4 %
If an upgrade is found, a message will be displayed
to decide downloading the new software or not. If
not, a screen will appear stating that an upgrade is
unavailable.
d
After searching software, message will be
displayed and press
you select No, then TV will be power off once the
Software update has completed.
NOTE: When Auto Upgrade is set to Off, this feature is
not available.

Network Upgrade

TOSHIBA may offer upgrades for the TV's software in the
future. The TV's software is upgraded via the Network.
Before downloading software:
Configure your TV to connect to the Internet.
NOTE: While the upgrade is being performed, you will not
be able to watch the TV.
a
In the Get Help menu, press B / b to select
Software Upgrade and press OK.
b
Press B / b to select Network Upgrade and press
OK.
NOTE: If the network is not available, a warning
message will appear.
c
The TV software upgrade will start when download
succeeds.
81
CONTROLS AND FEATURES
B / b to select
to select Over-the-air Upgrade and
to select Auto Upgrade and press
B b
/ to select Search
CH 855
C / c to select Yes or No. If
c