Troubleshooting - Philips GoGEAR SA5DOT02 User Manual

7 Troubleshooting

If MINIDOT/FITDOT is not working properly
or the display freezes, you can reset it without
losing data:
How do I reset MINIDOT/FITDOT?
• Insert a pen tip or other object into the
reset hole on MINIDOT/FITDOT. Hold
until the player shuts down.
•
If the reset option is unsuccessful, recover
MINIDOT/FITDOT through Philips
Device Manager:
1
On your PC, launch Philips Device
Manager.
2
Enter the recovery mode:
a Switch off MINIDOT/FITDOT.
b Press and hold the volume button
, and then, connect MINIDOT/
FITDOT to your PC.
c Keep holding the button until
Philips Device Manager recognizes
MINIDOT/FITDOT and enters the
recovery mode.
3
Start the recovery process:
a On Philips Device Manager, click the
Repair button. Follow the onscreen
instructions to complete the recovery
process.
b When the recovery is completed,
disconnect MINIDOT/FITDOT from
your PC.
4
Restart MINIDOT/FITDOT.
EN
13