Troubleshooting; Remote Control Batteries - Philips HTL1182B User Manual

Hide thumbs Also See for HTL1182B:
Table of Contents

Advertisement

Main unit
Power supply: 100-240 V~, 50/60 Hz
Power consumption: 35 W
Standby power consumption: ≤ 0.5 W
Dimensions (W x H x D):
865 x 67.8 x 85.5 mm
Weight: 1.8 kg
Built-in speakers: 4 x full range
(54.5 mm/2", 6 ohm)
Subwoofer
Impedance: 6 ohm
Speaker drivers: 1 x 134 mm (5.25")
woofer
Dimensions (W x H x D):
160 x 228 x 295 mm
Weight: 2.5 kg

Remote control batteries

1 x AAA-R03-1.5 V
12
EN

9 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on this product do not work.
Disconnect this product from the power
supply for a few minutes, then reconnect.
Sound
No sound from the speakers of this product.
Connect the audio cable from this product
to your TV or other devices.
Reset this product to its factory settings.
On the remote control, select the correct
audio input.
Make sure that this product is not muted.
Distorted sound or echo.
If you play audio from the TV through this
product, make sure that the TV is muted.
Audio and video are not synchronized.
Press AUDIO SYNC +/- to synchronize
the audio with the video.

Advertisement

Table of Contents
loading

Table of Contents