Do you have a question about the GoGEAR and is the answer not in the manual?
Questions and answers
Dave Almond
March 12, 2025
My gogear switched off during play why was that?
1 comments:
Mr. Anderson
March 12, 2025
Your Philips GoGear may have switched off during play due to a low battery. Try charging the device by connecting it to a power outlet with the AC adapter for about 30 minutes. If the display appears, continue charging for 3-4 hours until fully charged. If the issue persists, a soft reset may help. Press and hold the Power On/Off button and the volume + key for a few seconds. If the device still does not turn on, contact Philips Customer Care for assistance.
Page 1
Always there to help you GoGEAR Register your product and get support at www.philips.com/welcome Question? SA5DOT Question? Contact Contact Philips Philips User manual...
Search for a song Change the volume level Switch the random play on or off 5 FM radio Tune in to radio stations 6 Update the firmware through Philips Device Manager 7 Troubleshooting 8 Technical data PC requirements Need help? Please visit www.philips.com/welcome...
Back up your files. Ensure that you retain the original adapts and leave it there. files you have downloaded to your device. Philips is not To establish a safe volume level: responsible for any loss of data if the product becomes Set your volume control at a low setting.
Page 5
Unauthorized duplication of any recordings Philips is committed to improving the quality whether downloaded from the Internet or of your product and enhancing the Philips user made from audio CDs is a violation of copyright experience. To understand the usage profile of laws and international treaties.
Page 6
consequences for the environmental and human health.
Press: Decrease or increase the volume • • Press and hold: Skip to the previous or The images serve as reference only. Philips reserves the right to change color/design without notice. next song or radio station • 3.5 mm-headphone connector...
d FM • Press and hold to switch between the music and FM radio mode. e LED indicator f USB connector for power charging and data transfer g RESET • Press the hole by using the tip of a ball pen when the player does not respond to the pressing of keys LED indicator and audio feedback...
3 Get started » Power on: The green indicator lights up. Music play starts. » Power off: The red indicator lights up. One beep sounds. Charge power MINIDOT/FITDOT has a built-in battery that can be charged through the USB connector of a computer.
4 Play music Search for a song • Press and hold to skip to the previous or next song. » One beep sounds. Transfer music to the player Change the volume level • Press » During music play, you hear the change of volume level.
5 FM radio Note • Plug in the supplied earphones when you tune in to radio stations. The earphones double as antenna. For better reception, move the earphone cable in different directions. Tune in to radio stations Press and hold FM to switch from the music mode to FM radio mode.
Computer (Windows Vista / Windows 7 / 8). To check for firmware updates, Right click on the Philips GoGear MINIDOT/FITDOT icon. Select Install a Close the dialog box of Philips Device Philips Device Manager. Manager. Alternatively, click the Philips GoGear •...
Page 13
Update the firmware When the firmware update is available, follow the onscreen instructions to download and install the firmware. Disconnect MINIDOT/FITDOT from the » MINIDOT/FITDOT restarts after the firmware is updated and is ready for use again,...
Keep holding the button until Philips Device Manager recognizes MINIDOT/FITDOT and enters the recovery mode. Start the recovery process: a On Philips Device Manager, click the Repair button. Follow the onscreen instructions to complete the recovery process. b When the recovery is completed, disconnect MINIDOT/FITDOT from your PC.
• ³ Transfer speed depends on operating system and • Fast charging: 6-minute charging for software configuration. 60-minute play Software Philips Device Manager: To update the • firmware and recover the player PC requirements Connectivity • Headphone 3.5 mm •...
Need help?
Do you have a question about the GoGEAR and is the answer not in the manual?
Questions and answers
My gogear switched off during play why was that?
Your Philips GoGear may have switched off during play due to a low battery. Try charging the device by connecting it to a power outlet with the AC adapter for about 30 minutes. If the display appears, continue charging for 3-4 hours until fully charged. If the issue persists, a soft reset may help. Press and hold the Power On/Off button and the volume + key for a few seconds. If the device still does not turn on, contact Philips Customer Care for assistance.
This answer is automatically generated