Table of Contents
Advertisement
12 Troubleshooting
If SPARK is not working properly or the display
freezes, you can reset it without losing data:
How do I reset SPARK?
•
Insert a pen tip or other object into
the reset hole located at the bottom of
SPARK. Hold until the player shuts down.
•
If the reset option is unsuccessful, follow
the steps how to recover SPARK with the
Philips Device Manager:
1
On your computer, select Start >
Programs > Philips > Philips MP3 player
> GoGear SA2SPKXX Device Manager
to launch the Philips Device Manager.
2
Turn off SPARK before you continue.
3
Press and hold the volume button
while you connect SPARK to your
computer.
4
Keep holding the key until the Philips
Device Manager acknowledges SPARK
and enters the recovery mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect SPARK from your computer.
7
Restart SPARK.
EN
EN
25
Advertisement
Table of Contents
