Setting and adjusting the time
After connecting your appliance or after an extended power outage,
"12 : 00" will flash on the display.
To set the time on the clock Display
Set the time using the + and - buttons, then confirm by pressing
To change the time Display
Press the
button then the
Set the new time (e.g. 7 : 30) by using the + and - buttons.
Confirm by pressing
There is a beep to confirm that the new time has been set.
Contrast adjustment
Programming
Press the
button, then hold down
Adjust the contrast using the + and - buttons and
confirm by pressing the
Timer function
Programming
You can programme the "Timer" function on your oven.
Press the
button followed by the
Adjust the programme time using the + and - buttons,
e.g. 1 minute. Confirm by pressing
The display shows the time again but the countdown starts.
button twice. The time flashes.
.
for a few seconds until "CO" is displayed.
button.
button.
.
Using your appliance
11
12 : 00
06 : 30
06:30
07 : 30