Charging Batteries - Gigaset E500H User Manual

Charging batteries

The correct charge status can only be displayed if the battery is first
fully charged and then discharged.
¤ Place the handset in the base with its display facing forward for
6.5 hours.
Please note
The handset must only be placed in the designated E500/E500A
base or the corresponding charger.
¤ After charging, remove the handset from the base and only
replace it when the batteries are fully discharged.
Please note
u After the first battery charge and discharge, you may place
your handset in the charger after every call.
u Always repeat the charging and discharging procedure if you
remove the batteries from the handset and reinsert them.
u The batteries may warm up as they are charging. This is not
dangerous.
u After a time the charge capacity of the batteries will decrease
for technical reasons.
6.5h
First steps
17