Charging The Batteries - Gigaset 3000 Comfort Operating Instruction

Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm

Charging the batteries

The batteries supplied are not charged. To charge the bat-
teries, insert the handset either into the base station or the
Gigaset 3000L charging unit – you will hear the confirmation
beep. The charging operation is indicated by a flashing LED
on the handset:
Batteries flat
1
Batteries / charged
3
• Initially charge the batteries thoroughly; we recom-
mend charging the batteries for at least 16 hours with-
out interruption – irrespective of the charging status
icon.
• Once the first charging operation is complete, you can
replace the handset in the base station after any call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
• The batteries heat up during charging.
• The battery charging status is only correctly displayed af-
ter uninterrupted charging/discharging.
Approved batteries:
Nickel-cadmium (NiCd)
Sanyo N-3U (700 mAh)
GP GP60AAKC (600 mAh)
Varta 751RS (700 mAh)
Mobile Power 700 (700 mAh)
Panasonic 60 DT (600 mAh)
Always insert two batteries and only use batteries of the
same type/from the same manufacturer.
05.01.00
2
Batteries / charged
3
Batteries full
Nickel-metal-hydride (NiMH)
Sanyo H-3 U (1500 mAh)
GP GP130 AA HC (1300 mAh)
GP GP150 AA HC (1500 mAh)
Varta VH 1101 or Phone Power
(1100 mAh)
Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
7