Dynamics/Filter - Zoom G1on User Manual

DYNAMICS / FILTER
Comp This compressor in the style of the MXR Dyna Comp.
Sense
Page01
Adjusts the compressor sensitivity.
ATTCK
Page02
Sets compressor attack speed to
Fast or Slow.
This compressor is in the style of the dbx 160A.
160 Comp
THRSH
Page01
Adjusts the threshold that determines
when the effect is activated.
Knee
Page02
Sets the type of knee.
SlowATTCK This effect slows the attack of each note, resulting in a violin-like performance.
Time
Page01
Adjusts the attack time.
Page02
ZNR ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the tone.
THRSH
Page01
Adjusts the effect sensitivity.
Page02
NoiseGate This is a noise gate that cuts the sound during playing pauses.
THRSH
Page01
Adjusts the effect sensitivity.
Page02
This unit has a 6 band equalizer.
GraphicEQ
160Hz
Page01
Boosts or cuts the low (160 Hz) frequency
band.
3.2kHz
Page02
Boosts or cuts the high (3.2 kHz)
frequency band.
Level
Page03
Adjusts the output level.
ParaEQ This is a 2-band parametric equalizer.
Freq1
Page01
Adjusts center frequency of EQ1.
Freq2
Page02
Adjusts center frequency of EQ2.
Level
Page03
Adjusts the output level.
Parameter1
0–10 P Tone
Adjusts the tone.
Slow, Fast
Parameter1
-60 – 0 Ratio
Adjusts the compression ratio.
Hard, Soft Level
Adjusts the output level.
Parameter1
1–50 P Curve
Set the curve of volume change during
attack.
Parameter1
1–25 P DETCT
Sets control signal detection level.
Parameter1
1–25 P Level
Adjusts the output level.
Parameter1
-12–12 400Hz
Boosts or cuts the low-middle (400
Hz) frequency band.
-12–12 6.4kHz
Boosts or cuts the extremely high
(6.4 kHz) frequency band.
0–150 P
Parameter1
20Hz–20kHz Q1
Adjusts EQ1 Q.
20Hz–20kHz Q2
Adjusts EQ2 Q.
0–150 P
3
Parameter2
0–10 Level
Adjusts the output level.
Parameter2
1.0 – 10.0 Gain
Adjusts the gain after compression.
0 – 150 P
Parameter2
0–10 P Level
Adjusts the output level.
Parameter2
GtrIn, EfxIn Level
Adjusts the output level.
Parameter2
0–150 P
Parameter2
-12–12 800Hz
Boosts or cuts the middle (800 Hz)
frequency band.
-12–12 12kHz
Boosts or cuts the harmonics (12
kHz) frequency band.
Parameter2
0.5, 1, 2, 4, 8, 16 Gain1
Adjusts EQ1 gain.
0.5, 1, 2, 4, 8, 16 Gain2
Adjusts EQ2 gain.
Parameter3
0–150 P
Parameter3
0 – 20
Parameter3
0–150 P
Parameter3
0–150 P
Parameter3
Parameter3
-12–12
-12–12
Parameter3
-12–12
-12–12