Zoom G1on User Manual page 16

DELAY/REVERB
Plate This simulates a plate reverb.
PreD
Adjusts the delay between input of
Page01
the original sound and start of the
reverb sound.
Color
Page02
Adjusts the reverb time of the low
frequencies.
Tail
When ON, effect sound continues
Page03
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
This spring reverb sound is modeled on a '63 Fender Reverb.
Spring63
DWELL
Page01
Adjusts the amount of level that
input to reverb.
LEVEL
Page02
Adjusts the output level.
Air This effect reproduces the ambience of a room, to create spatial depth.
Size
Page01
Sets the size of the space.
Ref
Page02
Adjusts the amount of reflection
from the wall.
ModReverb This reverb generates fluctuating echoes.
Depth
Page01
Sets the depth of the modulation.
Rate
Page02
Sets the speed of the modulation.
Level
Page03
Adjusts the output level.
This unique complex reverb effect models the LINE6 M9 Particle Verb.
ParticleR
DWELL
Page01
Sets the duration of the reverberations.
MIX
Adjusts the amount of effected
Page02
sound that is mixed with the original
sound.
Parameter1
1 – 200 Decay
Sets the duration of the reverberations.
0 –100 P LoDMP
Adjusts low frequency damping in
reverb sound.
OFF/ON Level
Adjusts the output level.
Parameter1
0 –100 P MIXER
Adjusts the mix of volume the effect
sound.
0 –150 P
Parameter1
1–100 Tone
Adjusts the tone.
0–10 P Level
Adjusts the output level.
Parameter1
0 – 100 Decay
Adjusts the duration of the reverb.
1 – 50 P Tone
Adjusts the tone.
0 –150 P Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Parameter1
0 – 100 P GAIN
Adjusts the output gain of the reverb
sound.
0 – 100 P MONO
When OFF , the effect sound is output
in stereo. When ON, the effect
sound is output as a mono mix.
16 16
Parameter2
0 –100 P Mix
Adjusts the amount of effected
sound that is mixed with the original
sound.
0 –100 P HiDMP
Adjusts high frequency damping in
reverb sound.
0–150 P
Parameter2
0 –100 P TONE
Adjusts the tone.
Parameter2
0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 P Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Parameter2
1 – 30 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0 – 10 PreD
Adjusts the delay between input of the original
sound and start of the reverb sound.
OFF/ON
Parameter2
0 – 100 P MODE
Sets how the reverb sound changes.
OFF/ON Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Parameter3
0 –100 P
0 –100 P
Parameter3
0 –100
Parameter3
0–100 P
OFF/ON
Parameter3
0 – 100 P
1 – 100
Parameter3
STBL, CRTCL,
HZD
OFF/ON