System Layout Worksheets; Communications - Honeywell Ademco Vista-50P Programming Manual

System Layout Worksheets

Before programming any security system, you should first define the installation. To help you lay out a partitioned
system, use the following worksheets. This will further simplify the programming process.
Descriptor
Partition # (4-char max)
Partition 1
Partition 2
Partition 3
Partition 4
Partition 5
Partition 6
Partition 7
Partition 8
Keyswitch Arming Partition Assignment (1-8):
Wireless Keypad Partition Assignment (1-8):
Voice Module Partition Assignment (1-8):
Use Partition Descriptor (yes/no)?
Common Lobby Partition Assignment (1-8):
Option
Swinger Suppression Count 00-15; 00=no suppression
Cancel Report After Disarm
Dialer Reports for Panic (* + 1)
Dialer Reports for Panic (# + 3)
Dialer Reports for Panic (* + #)
Dialer Reports for Duress
Burglary Alarm Communications Delay (16 sec.)
Option
Entry Delay #1 (00, 30-225 seconds):
Exit Delay #1 (00, 45-225 seconds):
Entry Delay #2 (00, 30-225 seconds):
Exit Delay #2 (00, 45-225 seconds):
Quick Arming
Multiple Alarms per Arming
Console Panic for Zone 95 (* + 1)
Console Panic for Zone 96 (# + 3)
Console Panic for Zone 99 (* + #)
Allow Sign-on (GOTO function)
Non-Bypassable Zone*
Sounder Timeout Duration for Bell (2 min. increments)
Console Annunciation During Entry**
Console Annunciation During Exit
Confirmation of Arming Ding for Bell
Chime on Bell
Access Control Relay (field 1*76)
Affects Lobby (check partitions that apply)
Arms Lobby (check partitions that apply)
*Can be any zone 01-86. **no= 3 beeps
Prim. Sec.
Sub. # Sub. #
COMMUNICATION OPTIONS BY PARTITION
Part. 1
SYSTEM DEFINITIONS BY PARTITION (enter values or yes/no)
Part. 1
yes=continuous
PARTITIONS
Part. 2 Part. 3
Part. 2 Part. 3
– 31 –
Alpha Default Message
(32-character maximum)
Part. 4 Part. 5 Part. 6
Part. 4 Part. 5 Part. 6
Part. 7 Part. 8
Part. 7 Part. 8